Nason ful thane 2k urethane single stage mixing ratio - Application. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic.

 
Ful-Thane 2K Urethane Binder (IB Quality) (PDF 362.8 kB) Nason Ful-Base Enamel Topcoat (IC Quality) (PDF 258.0 kB) Nason Ful-Cryl II 2K Acrylic Enamel Topcoat (ID Quality) (PDF 334.5 kB). Hitler

SelectPrime™ 483-87™ 2K Activator (Mid-Temp) SelectPrime™ 483-88™ 2K Activator (Hi-Temp) MIX RATIO Combine the components by volume (4:1). Mix thoroughly prior to activation. Component Volume SelectPrime™ 421-17™ / 421-19™ 2K Urethane Primer 4 SelectPrime™ 483-88™ / 483-87™ 2K Activator 1 TINTABILITY Not recommended POT LIFEIn this video I finish up a series of door repair videos by painting the repaired panel using Nason Ful-Cryl II Single Stage Acrylic Enamel. Nason Ful-Thane ...K. kmoses Discussion starter · Feb 10, 2012. I sprayed the entire car with Nason Select-Prime 421-19 2K urethane primer and block sanded to P400 dry. I then sprayed the two front fenders, the hood and the trunk lid with Nason Ful-Poxy 491-16 Epoxy primer blocked sanded dry to P400 and wet sanded to P500 ( I am planning to spray the whole car ...Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.Axalta Nason 2K Urethane Sealer 422-50 Gallon. Item#: NAS 422-50 01. Nason 422-50 is a 2K urethane, non-sanding sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. Approved customers please Log In or Register for approval. Axalta Nason 2K Urethane Sealer Quart White.Ful-Thane 2K Low VOC Urethane Single Stage (NIS Quality) may be mixed with VS6200 Matte Base Additive to achieve various levels of desired gloss. For accurate mixing, refer to the matte mix formula in ColorNet® or Color Choice®. ADDITIVES . Fisheye Eliminator . Add 1 - 2 oz (30 ml – 60 ml or 30 – 60 grams) Axalta VS6500 Fisheye Eliminator ...Volume: 16 Ounce. Fast and easy to apply, Nason (R) Finishes take you from start to beautiful finish with speed and efficiency at a low cost. The system was designed to work together to give you the best results when time and money are limited. Nason (R) undercoats, topcoats and clears deliver Value in a Hurry (TM).I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some 600 to it the next day.one thing to keep in mind is the finish may dull out in a month after the initial cut/buff. nason is pretty easy to wet sand and buff after a month from what i have experienced with it. i noticed that if i do the wet sanding/buffing right after painting, it dulls out in about a month due to the paint curing and shrinking a little. so i prefer to have a vehicle back in a month or so and do it ...Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Dupont / Nason, Urethane Full Thane 2K Urethane, Single Stage,automotive paint restoration, 1-888-724-6844 Auto Paint Pro, Inc. [email protected] 23/10/2013 · The owner bought the cheapest single stage the paint shop had, Nason Urethane. After shooting we did a light scuff with 1200 to let it gas off for a week.To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Ful-Thane 2K Urethane Binder (IB Quality) (PDF 362.8 kB) Nason Ful-Base Enamel Topcoat (IC Quality) (PDF 258.0 kB) Nason Ful-Cryl II 2K Acrylic Enamel Topcoat (ID Quality) (PDF 334.5 kB)Axalta nason 2k integrated clear 401 20. Vht paint 70312 views. 8 1 2 ratio is for nason ful thane single stage. Designed to enhance the depth and color of ful thane factory packaged colors ful thane 2k urethane single stage colors and ful cryl ii mix colors. Nason paint color chart. How to mix nason car paint by contributor. Visit the post for ...Description. A National Rule compliant, Factory Package Snow White urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Ful-Thane 2K Urethane is the Nason brand’s premium single-stage paint that is easy to apply and ...Application. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic.Single Stage Topcoat ; Thinner ; ... FUL-THANE URETHANE SS BINDER "IS" 2.8 Gallon. ... SELECTSEAL 2K URETHANE SEALER - BLACK Gallon. Item #: 422-52 01.Approved customers please Log In or Register for approval. Axalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. Approved customers please Log In or Register for approval. Axalta Nason Fulthane Activator 1/2 Pint. Item#: NAS 483-15 -6.US :ENGLISH Ful-Thane 2K 2K Urethane Activator 483-15 Section 4. First aid measures Wash out mouth with water. Remove dentures if any. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomitingIf you use more reducer, or over reduce it, you can use the 2k primer as a sealer as well. MTK isn't a primer. It's a SS topcoat urethane that can be cleared or mixed with clear on the final coat.A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions Application Axalta Nason FulCryl II Acrylic Enamel Gallon Mix Item#: NAS ID 01. An acrylic enamel single-stage topcoat that provides very good gloss, chip resistance and durability for excellent performance characteristics. Please contact store for the proper price suffix for your color. Stock or paint code text may be added in the cart.Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)Approved customers please Log In or Register for approval. Axalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. Approved customers please Log In or Register for approval. Axalta Nason Fulthane Activator 1/2 Pint. Item#: NAS 483-15 -6.Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors.Part 401-20-4. 1 qt Paint. Designed to enhance the depth and color of Ful-Thane factory packaged colors, Ful-Thane 2K Urethane single-stage colors and Ful-Cryl II mix colors. Specifications.CODE DESCRIPTION REMARKS MIX RATIO HARDENER REDUCER MAX APPLIED VOC (LE) IB Quality Ful-Thane® 2K Single Stage Topcoat 8:1:2 483-15™ 441-2X 5.0 lb/gal IC Quality Ful-Base® Single Stage Topcoat 8:1:2 483-08™ 441-2X 5.0 lb/gal ID Quality Ful-Cryl® II Single Stage Topcoat 8:1:2 483-11™ 441-2X 5.0 lb/galVolume: 16 Ounce. Fast and easy to apply, Nason (R) Finishes take you from start to beautiful finish with speed and efficiency at a low cost. The system was designed to work together to give you the best results when time and money are limited. Nason (R) undercoats, topcoats and clears deliver Value in a Hurry (TM).MIXING COMPONENTS Mix 2 parts NasonXL Basecoat Color to 1 part NasonXL Reducer. Thin to spray viscosity of 16 secs with #4 Ford @ 77°F/25°C for spraying. Option for longer re-coating: Add 5% hardener to premixed basecoat Component Volume NasonXL Basecoat Color 2 NasonXL Reducers 1 (447-65 Fast, 447-75 Medium, 447-85 Slow) Package SizesDetailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some 600 to it the next day.Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers. Just got done spraying red Nason 2k Ful-thane single stage for the first time. I have some orange peel here and there along with some dirt in the hood. I have color sanded Centari and Delstar, but I am not sure how to tackle this with this newfangled urethane. I intend to hand wet sand with 1200 then buff.Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryJFG Discussion starter · Feb 25, 2009. Hi! I'm planning to paint my daily car as a practice before going on more serious project. I'm planning to use the Nason Ful-thane 2k urethane (solid black) with maybe a clearcoat Nason 497 (depending on your comments). The car (a small Nissan Sentra 1996 ) is already black so it's gonna be black on black.To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)Ful-Thane 2K Urethane Binder (IB Quality) (PDF 362.8 kB) Nason Ful-Base Enamel Topcoat (IC Quality) (PDF 258.0 kB) Nason Ful-Cryl II 2K Acrylic Enamel Topcoat (ID Quality) (PDF 334.5 kB)Detailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.A National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions Application Clear Coat 2K Acrylic Urethane, SMR-1150/1102-Q 4:1 Gallon Clearcoat Medium Kit. For California, Delaware, or Maryland, order SS-132. 4.6 out of 5 stars 771Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Catalyst Ful-Base® 441-20™ Reducer Fast Ful-Base® 441-21™ Reducer Medium Ful-Base® 441-22™ Reducer Slow Ful-Base® 441-29™ Reducer Super Flow MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers. Axalta Nason Fulthane 2K Urethane Pint Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...Axalta Nason 2K Urethane Sealer 422-50 Gallon. Item#: NAS 422-50 01. Nason 422-50 is a 2K urethane, non-sanding sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. Approved customers please Log In or Register for approval. Axalta Nason 2K Urethane Sealer Quart White.I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some 600 to it the next day.To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Title: Dupont Nason Paint Color Chart Pdf _ (Download Only) Created Date: 5/31/2023 7:53:26 AMApproved customers please Log In or Register for approval. Axalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. Approved customers please Log In or Register for approval. Axalta Nason Fulthane Activator 1/2 Pint. Item#: NAS 483-15 -6.A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions ApplicationNason Full-Thane lists the ratio as 8:1:2 My mix cups have 8:1:1 Using the '5' scale the distance between the 1:1 is 3/8". Will adding 3/8" mark to the last column give me an 8:1:2 ratio? View attachment 1715764917Spraying a single stage metallic is not fun with any paint.Make sure you have enough air pressure,even spray pattern,and you need to make dead even passes to have the proper metallic layout.Nason is a great paint IMO.I would bet money its the same as the higher end or discontinued Dupont products in a different can.I would use a base/clear system for any metallic paint.If you use more reducer, or over reduce it, you can use the 2k primer as a sealer as well. MTK isn't a primer. It's a SS topcoat urethane that can be cleared or mixed with clear on the final coat.It is a single stage, but there is a clear your can mix with it or another to spray after it. dont use clear on single stage. you just put the single stage on, color sand with 1500 or 2000 grit, then buff to shine. if you want to use a clear coat, then you need to use a base/clear setup. personally, i wouldnt use a single stage paint on a car ...Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)Title: Dupont Nason Paint Color Chart Pdf _ (Download Only) Created Date: 5/31/2023 7:53:26 AMNason 496-00 SelectClear 2K Urethane Spot Clear. Vendor: Mahopac Auto Paint. $146.99. $123.00. Nason 483-70 Selectclear 2K Activator-Mid-Temp (2.5L) Vendor: Mahopac Auto Paint. $171.99. $140.00. Nason 475-00 SelectClear 2K Urethane High Image Clear.MIX RATIO Combine the components by volume (4:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane® 2K Urethane Topcoat (IS Quality) 4 Ful-Base® 483-56™ Low VOC Activator 1 Ful-Base® 441-60™ / 441-66™ / 441-68™ Reducer 2 ADDITIVES Fisheye Eliminator Add ½ to 2 oz Nason® 495-02™ Low VOC Fisheye Eliminator per ready ...pre-formulated flat/mat clears are SOOOOOOOOO much easier on bigger jobs and all overs. all you do is mix and go. you can adjust the flatness by how many coats and reducer, again so much easier than a flattening ratio with an additive. i've done a few with sikkens mat clear with no problems, now give me a 2 component system where i have to mix some single stage and flattener in it and i cant ...Item#: NAS 400-50 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. GM Code 12 White 400-50 Gallon.Axalta nason 2k integrated clear 401 20. Vht paint 70312 views. 8 1 2 ratio is for nason ful thane single stage. Designed to enhance the depth and color of ful thane factory packaged colors ful thane 2k urethane single stage colors and ful cryl ii mix colors. Nason paint color chart. How to mix nason car paint by contributor. Visit the post for ...Axalta Nason 2K Integrated Clear 401-20. Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors.Axalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. 65-85 Degrees.Title: Dupont Nason Paint Color Chart Pdf _ (Download Only) Created Date: 5/31/2023 7:53:26 AMApplication. Solid Colors: Add 1 part of RTS Ful-Thane 2K Urethane Single Stage (NIB) or Ful-Cryl 2K Acrylic Single Stage (NID) color to 1 part RTS VS4500 2K Urethane Integrated Clear during the last and final coat of the single-stage color. Effect Colors:A National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.Dupont Fleet book, page by page. If you are on a PC click on any of the. images and the images will pop up. You can hit next and the whole or most of the page will turn into a gallery.A National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.Axalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles.It is a single stage, but there is a clear your can mix with it or another to spray after it. dont use clear on single stage. you just put the single stage on, color sand with 1500 or 2000 grit, then buff to shine. if you want to use a clear coat, then you need to use a base/clear setup. personally, i wouldnt use a single stage paint on a car ...Additive: FEE: 2-4 oz 495-01™ per RTS gal. Accelerator: 2-4 oz 483-18™ per RTS gal. Viscosity: 20-21 seconds in a Zahn #2 cup: Pot Life: 4 hours at 70°FBut at $840 for gallon of paint, hardener, and reducer, I decided to give Ful-thane a go. I picked up a gallon of Ful-Thane, hardener, reducer, quart of clear, and hardener, for $433.16. Cheap enough. I got the cab ready for paint yesterday. This morning, conditions are absoloutely perfect for painting.Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors.Axalta Nason 2K Integrated Clear 401-20. Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors.Axalta nason 2k integrated clear 401 20. Vht paint 70312 views. 8 1 2 ratio is for nason ful thane single stage. Designed to enhance the depth and color of ful thane factory packaged colors ful thane 2k urethane single stage colors and ful cryl ii mix colors. Nason paint color chart. How to mix nason car paint by contributor. Visit the post for ...Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Ful-Thane® 2K urethane is also available in Ful-Thane® 400-XX High Volume Factory Packages.Axalta Nason 2K Urethane Sealer 422-50 Gallon. Item#: NAS 422-50 01. Nason 422-50 is a 2K urethane, non-sanding sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. Approved customers please Log In or Register for approval. Axalta Nason 2K Urethane Sealer Quart White.I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some 600 to it the next day.

we were going to use the Nason ful-thane , but our supplier suggested the Imron. I was amazed at how well it sprayed. You can plow that stuff on & it will not run. Im seriously thinking about using it when I do my truck. you can even get it in Flat, Semigloss, or regular gloss. RM's Uno is good also, I like the way it lays down, & it seems to last.. W lee o

nason ful thane 2k urethane single stage mixing ratio

Parts by Volume. IF Quality. 8. 483-00™. 1/2. 441-2X. 4. Viscosity. 20-21 seconds in a Zahn #2 cup.DuPont Top Coat Nason® Ful-Thane® 2K IB Quality Single-Stage Topcoat FUL-THANE® 2K URETHANE Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Download tech data.we were going to use the Nason ful-thane , but our supplier suggested the Imron. I was amazed at how well it sprayed. You can plow that stuff on & it will not run. Im seriously thinking about using it when I do my truck. you can even get it in Flat, Semigloss, or regular gloss. RM's Uno is good also, I like the way it lays down, & it seems to last.one thing to keep in mind is the finish may dull out in a month after the initial cut/buff. nason is pretty easy to wet sand and buff after a month from what i have experienced with it. i noticed that if i do the wet sanding/buffing right after painting, it dulls out in about a month due to the paint curing and shrinking a little. so i prefer to have a vehicle back in a month or so and do it ...Show's how to do a complete automotive paint job using inexpensive materials such as old school lacquer primer from Auto Body Master and Nason Ful-Cryl II Ac...I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some 600 to it the next day.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryAxalta Nason 2K Integrated Clear 401-20. Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. Your Price: 0.99. Nason Single Stage Gloss Question How to Paint Your Own Dupont / Nason Urethane Full Thane 2K Urethane SingleA National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.item 3 Nason SelectClear 258-00 2K activator 258-08 Urethane Multi-Panel Clearcoat Kit Nason SelectClear 258-00 2K activator 258-08 Urethane Multi-Panel Clearcoat Kit $130.00 Free shippingAxalta Nason 2K Integrated Clear 401-20. Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors.Title: Dupont Nason Paint Color Chart Pdf _ (Download Only) Created Date: 5/31/2023 7:53:26 AMFul-Thane 2K Urethane Binder (IB Quality) (PDF 362.8 kB) Nason Ful-Base Enamel Topcoat (IC Quality) (PDF 258.0 kB) Nason Ful-Cryl II 2K Acrylic Enamel Topcoat (ID Quality) (PDF 334.5 kB)In this video I finish up a series of door repair videos by painting the repaired panel using Nason Ful-Cryl II Single Stage Acrylic Enamel. Nason Ful-Thane ...Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Approved customers please Log In or Register for approval. Axalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. Approved customers please Log In or Register for approval. Axalta Nason Fulthane Activator 1/2 Pint. Item#: NAS 483-15 -6.But at $840 for gallon of paint, hardener, and reducer, I decided to give Ful-thane a go. I picked up a gallon of Ful-Thane, hardener, reducer, quart of clear, and hardener, for $433.16. Cheap enough. I got the cab ready for paint yesterday. This morning, conditions are absoloutely perfect for painting.Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers. .

Popular Topics